Call for publications

[dsrawlins]

Hi all,

As part of our grant renewal process for the FEBio project, it would be helpful to know what publications have used FEBio as part of the research. If you have published an article or extended abstract that uses FEBio, please respond to this post with a reference to the article or abstract. A doi would be particularly useful.

Thanks,

Dave

[siboles]

Hi Dave,

Our lab has used FEBio in the following extended abstracts:

Sibole, S., Bennetts, C., Borotikar, B., Maas, S., van den Bogert, A. J., Weiss, J. A. and Erdemir, A. Open knee: a 3D finite element representation of the knee joint, 34th Annual Meeting of the American Society of Biomechanics, August 18-21, 2010, Providence, RI.

Halloran, J., Sibole, S., and Erdemir, A. Three Dimensional Cellular Loading and Average Microstructural Tissue Response Using Single and Three Cell Constructs, Proceedings of the ASME 2011 Summer Bioengineering Conference, June 22-25, 2011, Nemacolin Woodlands Resort, Famington, Pennsylvania.

Sibole, S., and Erdemir, A. A Pipeline for High Throughput Post-Processing of Joint and Tissue Simulations for Estimation of Cell Level Deformations, Proceedings of the ASME 2011 Summer Bioengineering Conference, June 22-25, 2011 Nemacolin Woodlands Resort, Famington, Pennsylvania.

Erdemir, A., Sibole, S. Open Knee: Capacity to Reproduce Passive Joint Kinematics. Proceedings of ISB Congress XXIII, July 3-7, 2011. Brussels, Belgium.

Cheers,
Scott

[kmadi]

Hello Dave,

A first contribution using FeBio that will be published soon in the ECCOMAS Proceedings:

Viscoelastic modelling and full-field strain computation of biphasic scaffold dor osteochondral defect repair, K. Madi, A. Booker, G. Tozzi, Zhang Z-Y., Y-H. Siu, C. Lupton, J. Tong, A. Cossey, A. Au and F. N’Guyen, ECCOMAS – INTERNATIONAL CONFERENCE ON TISSUE ENGINEERING 2011, P.R. Fernandes et al. (Eds.), Lisbon, Portugal, June 2-4, 2011

Kind regards,

Kamel

[edwards9]

Hi Dave,

The following paper was recently published and used FEBio:

Edwards WB, Troy KL. Finite element prediction of surface strain and fracture strength at the distal radius.Med Eng Phys (2011), doi:10.1016/j.medengphy.2011.07.016

Thanks,

Brent

[kevinmattheusmoerman]

Paper presented at ISB 2010 Brussels

TOWARDS THE NON-INVASIVE DETERMINATION OF THE ANISOTROPIC AND VISCOELASTIC MECHANICAL PROPERTIES OF LIVING HUMAN SKELETAL MUSCLE TISSUE

1,2Kevin M. Moerman, 2Andre M.J. Sprengers, 2Aart J. Nederveen, 2Martijn Froeling, 2,3Rolf M. Lamerichs and 2Ciaran K. Simms
1University of Dublin, Trinity College, Trinity Centre for Bioengineering, Dublin, Ireland
2Academic Medical Centre, Department of Radiology, Amsterdam, The Netherlands
3Philips Research, Eindhoven, The Netherlands

[dsrawlins]

Thanks to all who have submitted publication references! We now have a list of 41 articles, abstracts and book chapters that reference FEBio published over the last three years! This information will be very important for our application to renew the FEBio NIH grant, due at the beginning of November, 2011. Our current list of FEBio publications can be found on the Publications tab at the FEBio website (http://mrl.sci.utah.edu/software/febio). If you have publications (research articles or abstracts) that are published, "in review" or "in preparation" that are not on the list, please send us the reference information by October 21, 2011 so that we may include it in our Progress Report.

Best regards,

Dave

[edwards9]

Hi Dave,

The following paper used FEBio:

Edwards WB, Troy, KL. Simulating distal radius fracture strength using biomechanical tests:a modeling study examining the influence of boundary conditions. J. Biomech. Eng. (2011). [DOI: 10.1115/1.4005428]

Thanks,

Brent

[dsrawlins]

If you publish manuscripts, conference papers or abstracts that use FEBio, please reference the following manuscript: FEBio, Finite elements for biomechanics

[njeffery]

Dave,
here is another paper for the 2014 list - sorry I couldn't be with you all in Utah. Hoping to get funds for the next Summer course.

Vickerton, P., Jarvis, J. C., Gallagher, J. A., Akhtar, R., Sutherland, H., & Jeffery, N. (2014). Morphological and histological adaptation of muscle and bone to loading induced by repetitive activation of muscle. Proceedings of the Royal Society B: Biological Sciences, 281(1788), 20140786. (doi: 10.1098/rspb.2014.0786)

best
nathan

[dsrawlins]

Thanks, Nathan!

[christian.moyer]

Here is my publication on left atrial mechanics that used FEBio extensively:

http://www.ncbi.nlm.nih.gov/pubmed/25631205

[fzmb treuter]

Hi Dave,

The following Thesis was recently published and used FEBio:

Reuter T: 2015. Determination of biomechanical parameters of articular cartilge with the help of FEM using experimental stress relaxation and creep indentation data. ME, Computational Engineering: Beuth University of Applied Sciences. Supervisor: Hurschler C, Hannover Medical School (MHH), Laboratory for Biomechanics and Biomaterials (LBB).

Best

Thomas

[kevinmattheusmoerman]

http://www.ncbi.nlm.nih.gov/pubmed/26719933

My recent publication featuring FEBio.


Kevin

[kevinmattheusmoerman]

http://www.ncbi.nlm.nih.gov/pubmed/26719933

My recent publication featuring FEBio.


Kevin

[AdrianF]

Our article addressing indentation testing of (thin) layers is based on a FE model solved using FEBio:

https://doi.org/10.1007/s10237-017-0969-4

Adrian