Having problem with spherical indentation model

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • eldo97
    Junior Member
    • Oct 2019
    • 9

    Having problem with spherical indentation model

    Hi there,

    Im having problems with going about setting up a spherical indentation model. Iv managed to soccesfuly complete the tutorial 9 example but a spherical indenter is leaving me confused. Any advice would be greatly appreciated. Im new to FEBio. Iv attached my .feb file bellow.

    Many thanks, Lewis
    Attached Files
  • brandonz
    Member
    • Oct 2014
    • 48

    #2
    Hi Lewis,

    I ran your model and it appears to work perfectly. Could you clarify what problems you are having?

    Your deformation is very small, because you are only requesting a step displacement of 0.002 units. If you want to see larger deformation, increase this value to something much larger, e.g. 0.02.However, note that a step displacement may cause convergence issues as the displacement magnitude increases.

    Brandon

    Comment

    Working...
    X
    😀
    😂
    🥰
    😘
    🤢
    😎
    😞
    😡
    👍
    👎