Results 1 to 2 of 2

Thread: Very big rigid acceleration in z-axis

  1. #1
    Join Date
    Mar 2017
    Location
    Patra Greece
    Posts
    24

    Default Very big rigid acceleration in z-axis

    Hello everyone,

    I have an issue with the rigid aceeleration in z axis. In my analysis a set a compresion load in z-axis which reach the 1000N after 8 timesteps. The geometry is a femur-tibia bone with acl,pcl,lcl,mc ligaments and
    meniscus later medial. In the forth time step where it has reach the 300N the rigid acceleration in z axis is too big, it reach the 3000m/s^2. That make no sence. Could anyone tell me if his know, how can find where the problem is?

    Best,
    Michail

  2. #2
    Join Date
    Dec 2007
    Posts
    701

    Default

    Hi Michail,

    It is difficult to diagnose this issue without an example file. Would you please upload this example?

    Best,

    Gerard

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •